$78.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 12° - Measured Center-to-Center at the levers
$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.
$46.00 - $56.00
TruVativ's super-tough Hussefelt Riserbar is made from triple-butted AL-66 for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.
Surly's Open Bar Handlebar is the go-to option for a good time. It features lots of space for grips, shifters, brake levers, or any combination of the a fore mentioned. The swept-back angle is comfortable for your wrists, and the stout chromoly construction is durable yet compliant. It's at home on bike paths or neighborhood cruises, and at an ominous 666mm, it's even wide enough to tackle some singletrack.
The Salsa Cowchipper provides comfort, control, and efficiency for long days in the saddle, whether road touring, crushing mixed surfaces, or conquering the Great Divide. While the Cowchipper retains some resemblance of a traditional road bar, its radical 24° flare in the drops boosts leverage, stability, and comfort dramatically. - Lightweight and strong 6061-T6 aluminum alloy construction - 116mm drop, 68mm reach, 24° flare angle, 12° drop angle - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - Weight: 322g (44cm)
Whatever your adventure, Rustler handlebars are tough, durable, and comfortable. Whether you are out exploring a new trail or devouring your favorite descent, they’ll help keep you in control and ready for the terrain ahead. - Lightweight and strong 6061-T6 aluminum alloy construction - Signature 11° back sweep, 6° up sweep, 20mm rise - 800mm and 750mm width options - Graduated lines for easy trimming - 31.8mm clamp diameter with 93mm width for use with Salsa Anything Cradle and aerobars - Weight: 374g - Note: Rustler bars are not compatible with bar ends
Woodchipper is Salsa’s signature drop bar for off road riding, where its unique shape delivers comfort and control no matter how rough the terrain. Woodchipper Bars bend along three planes to create extra-wide lowers while still maintaining a shallow drop. - Lightweight and strong 7050-T6 series aluminum alloy construction - Ergonomic design works well with integrated road shift/brake levers or bar end shifters - 114mm drop, 56mm reach, 25° flare angle, 38° drop angle - Available in 42, 44, and 46cm widths - 31.8mm clamp diameter with 120mm width for use with Salsa Anything Cradle and aerobars - The Woodchipper’s non-conventional shape requires a unique setup for optimal comfort. The brake/shifter position should be canted downward slightly, resulting in a 20–25° downward angle of the drops. - Weight: 329g (44cm)
Our Range Handlebar Gen 3 remains focused on ergonomics and comfort, with a width of 800mm and a new 35mm diameter option. With the industry continually trending towards frames with longer reach, our Range Handlebar Gen 3 prioritizes minimizing back discomfort and wrist fatigue so you never feel like you have ol' bird bones on your climbs or descents. PERSONAL PREFERENCE Whether you're an OG or looking for that new new, the new Range Bar now comes in both 31.8mm and 35mm options. WRIST & BACK SAVERS A comfy combination of 10 degree back sweep, 5 degree upsweep and a 30mm rise puts your arms and shoulders in a more relaxed position. LOST WEIGHT, BUT GOT BIGGER? Science? Physics? Engineers are crafty. By maximizing the butting profiles, we removed as much as 25 grams from our previous bar.
- Unidirectional carbon fiber riser bar with 35mm stem clamp area - Downhill strength with 25% weight savings compared to aluminum
All Mountain / XC The Cutlass bar crosses categories from XC to Enduro with a 31.8mm diameter and width of 780mm. 220g of premium quality unidirectional carbon fiber ensures that this bar is about reliable strength and durability with a responsive feel. It features a 25mm rise for aggressive rider position tuned with a 5° upsweep, 8° bend orientation. The geometry of this bar now matches our OSX perfectly.
The SL-70 Aero is a unidirectional carbon handlebar is packed with the innovations for best-in-class fit, ergonomics, and aerodynamic performance. With its wing-shaped bar top, the SL-70 Aero features Zipp's latest bar refinements while building on the trend-setting aero legacy of the VukaSprint. The wing-shaped top was designed using Computational Fluid Dynamics (CFD). The difference of that design is real, saving 6.4 watts over a round-tube section bar top. Beyond aero performance, the SL-70 Aero features a 70mm reach to allow proper fit without compromising stem length and steering control. The revised 10° ramp angle to the brake hoods eliminates the need for up-rotated bars. The bar also provides ample wrist clearance for riding and sprinting in drops. - Updated distinctive Zipp cosmetics - 70mm reach and 128mm drop allows for a low and aero drops position - Internal cable routing is easy with Rapid Route - Lifetime warranty
Light weight, comfort, and strength: the new SL-70 Ergo is the ultimate handlebar for long days in the saddle. The SL-70 Ergo combines the flat bar top shape of the beloved Contour SL bar with numerous modern features sought after by riders and pro bike fitters. The SL-70 Ergo sports a 70mm reach and 128mm drop. The short 70mm reach has been a popular choice in recent years, as it allows bike fitters flexibility in achieving a comfortable position without sacrificing steering control. The drop utilizes a variable radius, allowing for multiple hand positions and deeper movement into the drop. As a result, reach to the brake lever is shorter. A 3° backsweep on the flat tops keeps the wrist in a comfortable position, essential for long days on pavement or gravel, while the 10° ramp angle provides a smooth transition to modern shifter hoods. Brake and shifter housing is elegantly hidden along the underside of the bar. - Updated distinctive Zipp cosmetics - Unidirectional carbon built for stiffness, comfort, and light weight - Flattened top shape with 3° backsweep for comfort - Variable radius drop for multiple hand positions and deeper movement into the drop. - Lifetime warranty
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 Ergo handlebar. The Service Course lineup provides options to match every rider with a high-performance, precise fitting bar. The Service Course 70 Ergo packs a powerful punch of everything you'd want in a bar — a design based on feedback from pro bike fitters and riders, an ergonomic top section, and a price you'll love. - 6061 aluminum for low weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape to better fit the hand - ISO 4210 compliant
On today's road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored handlebar color is available on the Zipp Service Course 70 XPLR, our newest drop-bar offering. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle — from paved roads to gravel, mud, dirt, and even singletrack. The Service Course 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Whether on a two-hour training ride from home or a 200-mile gravel adventure, today's riders demand more of their cockpit: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops while focusing on two crucial metrics — outsweep and flare. - Bar drops provide a wider, balanced, and secure position with drops that are about 6cm wider than the hoods position for technical or intense riding. - The 70 XPLR features an ergonomic top with an extended 100mm clamping area for computer mounts, aero-extensions, bags, and whatever else you may need for the long haul. - Reach: 70mm - Drop: 115mm
When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)
The bar offers the same compact reach and drop dimensions as the Service Course SL-70 but adds a flattened top section for a natural ergonomic grip on the bar tops and a revised ramp angle for proper fit. The SL-70 Ergo's specially tuned drop shape creates comfortable hand positions with the short reach to control levers vital for race situations. The bar's 128mm drop help puts the rider low and in control without compromising comfort. Whether it's a rider with smaller hands or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Lifetime warranty
The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Matte Black nano blast aluminum - Clip-on Compatible - Lifetime warranty
This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty
Zipp Service Course SL 80 Ergo handlebar is all about making you faster in style and comfort. The bar offers an 80mm reach and 125mm drop, perfect for a rider looking for a medium reach and shallow drop who likes reaching down to, rather than into, the drops. This bar has a flattened top and 3° backsweep for a neutral wrist position on the tops. The bars feature a 7° ramp angle for a flat transition to the hoods and a 4° outsweep at the drops. In addition to the ergonomic benefits, the Service Course SL 80 Ergo is our first ergo bar to be clip-on compatible. Made of 7050 aluminum, the Service Course SL 80 Ergo weighs 275g for a 42cm-wide bar. Light weight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 80mm reach and 125mm drop for a medium-high position - Flattened top shape with 3° backsweep for comfort - Clip-on Compatible (40, 42, 44cm sizes only) - Di2 RS910 junction compatible - Lifetime warranty
The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty
Zipp’s Vuka Aero redefines aero handlebar conventions while being compatible with modern-day aero bikes. The current redesigned Vuka Aero builds on the technological foundation of aero excellence set by the original version. Vuka Aero is an integrated aero bar that features market-leading adjustability; it can be used with any stem to help you find your ideal position on the bike. The airfoil used in the Vuka Aero is based on the shape of the SL-70 Aero road bar. The result is an aero bar that’s stiff and streamlined while maintaining the UCI’s 3:1 aspect ratio requirement. - Market-leading adjustability in pad fore-aft, width, height, and angle - Integrated Carbon Aerobar works with any 31.8mm clamp stem - Integrated SRAM eTap AXS Blip box mount in the Center Cap - Rapid Routing cable exits are positioned for easy installation of brake cables - Vuka Aero ships with base bar, extension clamp, and armrest clamp - Extensions sold separately
The Vuka Alumina base bar delivers on a big challenge given to our engineers — create a high-performance aluminum base bar that’s sleek and light with the right amount of adjustability. The Vuka Alumina, crafted from 6066 series aluminum, offers superior aerodynamics and ergonomics at an affordable price. The handgrips are angled upward by 5 degrees for a natural wrist position when climbing or sprinting. It’s optimized for use with the VukaClip but is compatible with most clip-on extensions. With its bead blasted black finish and gloss graphics, this bar looks as good as it performs. - Lightweight at only 250g - Offers superior aerodynamics and ergonomics - Clean internal cable routing for easy installation - Compatible with all current drivetrain systems and all plug-in style brake levers - Mounting area is 120mm wide to allow for an array of positions to accommodate many riding styles and body types
Zipp's Vuka Shift AXS 90 is more than an aero extension; it's a complete shifting system. Think of it as a supremely efficient solution to house the brains of your SRAM RED or Force eTap AXS time trial or triathlon bike. The Vuka Shift AXS 90 cleanly houses your aerobar extensions, shift-control, and head unit in one neat and clean package. This approach solves an emerging problem of the age of electronic shifting. The time for system integration is now—with this seamless solution. The extensions themselves feature the pro-proven Vuka Evo shape with a 90mm rise. The Vuka Shift AXS 90 is compatible with more than 90 percent of the integrated aerobar systems currently on the market. - AXS Integrated Aerobar shifting system - Length is trimmable, 10mm at front and 90mm at rear - Integrated Garmin/Wahoo/Bryton computer mount - Ships with SRAM Clics extension-end shifters and Blips shifting buttons for brake-lever position shifting - More than an aero extension, this is an integrated shifting system for the modern triathlon/TT bike - Cleans up your aero cockpit for simplicity and optimized aero efficiency
Our Milhouse Handlebar has the distinction of being the first and only of its kind: A full carbon moto-inspired riser bar. Featuring a 16-degree backsweep and 8-degree upsweep for comfort and control, it's tested and approved for getting rad on the roughest terrain. A statement piece for custom builders and upgraders alike, the Milhouse is equally at home on klunkers, bikepacking rigs, singletrack steeds, or simply cruising the streets with style. Trimmable ends marked with easy-to-read graphics allow you to dial in your fit for maximum confidence wherever the trail takes you. - Unidirectional carbon fiber construction - Trimmable ends, made easy with graphic markings - No rider weight limit - ASTM Condition 3 – For rough off-road riding and jumps less than 24" - 90mm clamping area to fit Salsa Anything Cradle - 31.8mm clamp, 70mm rise, 16-degree backsweep, 8-degree upsweep - 825mm wide - Weight: 288g
Whisky's No.7 24f is designed for comfort and control in challenging situations. Specifically aimed at long distance touring, gravel, or off-road pursuit, the 24-degree flare offers huge control from the drops. This thoroughly modern drop bar is the perfect match to your off-road tourer, monstercross bike, or get-rad CX rig. The 24f’s sleek design offers seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs. - 7050 Alloy - 282g (42cm) - Drop: 116mm - Reach: 68mm - Flare: 24° - Measured Center-to-Center at the levers
Whisky's No.9 Flat Bar keeps your weight lower and more forward on the bike for a more aggressive riding position. It’s wide, sleek, and tested to the highest standards to deliver hours of reliable trail riding. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
Whisky's No.9 Riser Bar features a 25mm rise and a 5-degree upsweep to offer a slightly more upright riding position that increases control and comfort. It’s wide, sleek, and tested to the highest standards to deliver a ride you can trust mile after mile. Trimmable ends allow you to really dial in your fit to keep you comfortable every time your tires hit the dirt or snow.
The No.9 12F Carbon is Whisky’s most versatile drop bar, that’s equally at home on tarmac, gravel, twisty cyclocross courses, and double-track. From touring to racing, this modern bar is a great addition to almost any bike. The comfortable 12-degree flare provides excellent control and comfort, especially off-road or in challenging conditions. A semi-compact design offers seamless transitions between positions, and we’ve made smart updates to improve compatibility with all your favorite drop bar controls. - Unidirectional carbon fiber construction with new carbon layup to better accommodate clamping forces of modern controls - Drop/Reach: 115/68mm
The No.9 24F carbon drop bar is designed for comfort and control in challenging situations. Specifically aimed at long-distance touring, gravel, and off-road pursuits, the 24-degree flare offers huge control from the drops. The carbon construction provides a light, stable platform that reduces vibration and adds comfort, plus a new carbon layup that better accommodates clamping forces of modern controls. This thoroughly modern drop bar is the perfect match to your off-road tourer, monster cross bike, or get-rad CX rig. The 24F’s sleek design offers a seamless transition between positions. Available in a broad size range, there’s a width to perfectly fit your needs.
The No.9 35.0 Mountain Carbon Handlebar is designed and built for the most extreme trail and all-mountain riding. The oversized stem clamp adds to front-end stiffness for precise input, while the carbon construction provides vibration damping in a lightweight and durable package. - Unidirectional carbon fiber construction - 35mm stem clamp - 8 degrees of backsweep with 5 degrees of upsweep - Trimmable ends, made easy with graphic markings - Rated to ASTM Condition 4 for extreme off-road riding
Page 1 of 12 Next page