Filter By:
- Bar Ends (17)
- BMX (72)
- Bottom Brackets (269)
- Brakes/Levers/Pads (782)
- Cables (242)
- Cassettes/Freewheels (163)
- Chainrings (347)
- Chains (162)
- Show More Categories
- Cranksets (336)
- Derailleurs (172)
- Forks (211)
- Groups (31)
- Handlebar Grips/Tape (415)
- Handlebars (339)
- Headsets (222)
- Pedals (455)
- Saddles (441)
- Seatposts (141)
- Shift/Brake Combinations (72)
- Shifters (138)
- Shocks (40)
- Stems (193)
- Other (2710)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
- Show More Model Years
- Show Fewer Model Years
Parts

$20.00
iSSi's SPD cleats are perfect for all your SPD-compatible pedals. If your entry and exit isn't what it used to be, a cleat replacement is just what the bike doctor ordered.
- 4 degrees of float both inward and outward

$70.00
iSSi's Trail pedal provides a wider platform, solid pedal contact, and mechanism protection for the rigors of cross-country and all-mountain riding—the iSSi Trail pedal provides the rider with more control and more confidence when the terrain gets tough.
- Chromoly spindle, ED-coated
- 8mm hex broach
- 52.5mm spindle length
- SPD Compatible
- Black chrome hardware
- Adjustable spring tension
- 4º cleat float
- Compatible with two-bolt style shoes
- Two-sided clipless pedal

$18.00
Zipp’s Handlebar Gel Pad Set is a fast, easy way to minimize the countless bumps and vibrations from riding on less-than-perfect roads. This pack of two precision-shaped silicone gel contours to the tops of drop-style handlebars. Without tape on the bar, roll back your brake hoods and place the specially designed gel strips on the top of the bar from where the brake is attached to the handlebar. Simply rewrap your bar tape over the gel and enjoy the smooth ride.

$30.00
Zipp's Service Course Cyclocross Bar Tape boasts extra padding for excellent cushioning and an exceptional grip. This classy wrap is embossed with logos for a custom look and includes end plugs and finishing-tape strips.

$69.95
The Wolf Tooth 76 BCD chainrings fit any SRAM 76 BCD spider or Specialized Stout crankset.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life

$65.00
Designed to fit 94 BCD 4-Bolt cranks such as the SRAM X1 crank, these rings will provide maximal chain retention and minimal noise. These rings feature the patent pending Drop-Stop asymmetrical tooth design for the best in wear life, mud clearance, and chain retention.
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075-T6 aluminum for long life
- 49mm chainline
- Use of a clutch-style rear derailleur is recommended

$81.95
Designed to fit 4-arm 96 Asymmetric BCD XT M8000 Cranks. Its proprietary design has an ovality of 10% and a timing of 112 degrees after top dead center which provide the beneifits of an oval ring such as greater rear wheel traction without the traditional downsides of oval rings. This chainring features the patent pending asymmetrical Drop-Stop tooth design for the best in wear life, mud clearance, and chain retention.
- The simplest way to explain the way these rings feel is having 2 teeth less in the weak part of your pedal stroke and 2 teeth more where you have the most power
- Features Wolf Tooth's Drop-Stop tooth design for maximum chain retention
- Drop-Stop chainrings are designed for use with 1x9, 1x10, 1x11 and 1x12 drivetrains
- Compatible with all 10-, 11-, and 12-speed chains, with the exception of Shimano 12-speed chains
- Shimano 12-speed chains require the use of Wolf Tooth's Shimano 12-speed specific chainrings
- If using a 9-speed drivetrain, use a 10-speed chain, which will provide a tighter fit for better chain retention
- Made from 7075 Aluminum for long life
- Use of a clutch-style rear derailleur is recommended

$70.00
Wolf Tooth ReMote Light Action has a longer lever arm than the standard ReMote and is optimal for dropper posts with a harder pull or for riders that just prefer a really light actuation feel. It reduces the force to actuate a dropper by nearly a third of the standard ReMote. Based on rider feedback and tailored to work with some posts' stiffer internal springs, the ReMote Light Action is also the choice of those with thumb injuries or reduced hand strength.
- Upfront cable fixing
- Large diameter ball bearing
- Cable-kind clamp
- Low-profile, light action
- Integrated cable adjust
- Breakaway axle pivot
- High-traction lever
- Broad compatibility

$35.00
The RoadLink DM (Direct Mount) is the RoadLink designed to fit Shimano's current generation R8000 Ultegra and R9100 Dura-Ace rear derailleurs. It serves as a simple device to offset the position of the rear derailleur, making it possible to run a wide-range mountain bike style cassette. It's an ideal solution for riders looking to convert their road, gravel, cyclocross, or commuter.
- Fits Shimano R9100-generation Dura-Ace and R8000-generation Ultegra rear derailleurs
- CNC machined from 6061-T6 aluminum with stainless steel bolt
- Does not change the derailleurs total chain wrap capacity
- Fits standard derailleur hangers only
- Best used with Single or Double Setups - see manufacturer's site for more details

$25.00
Roadlink Rear Derailleur Part
- The RoadLink is optimized for use with ten or eleven-speed 11-36t and 11-40t cassettes
- 11-42 or 10-42 setups are not supported
- Works with all 10-11 speed Shimano and SRAM Road Derailleurs
- Best used with Single or Double Setups - see manufacturer's site for more details

$45.00
The Tanpan brings the range and security of Shimano mountain rear derailleurs to Shimano-equipped drop-bar bicycles. This means a greater gearing range for bigger adventures, better chain security for rough terrain, and lighter weight and reduced complexity for the daily commute. In order to deliver these benefits, the Tanpan amplifies road shifter cable pull to allow for seamless communication with mountain derailleurs. The result is ideal for riders looking to convert their road, gravel, cyclocross, or commuter bike to the simplicity and light weight of a single chainring.
- Not Compatible with Tiagra 4700
- Compatible with most road, CX and gravel bikes
- Designed to mount directly to adjuster-free cable stops on Shimano rear derailleurs
- Certain chainring and cassette configurations benefit from a Goatlink
- If the rear derailleur cable is routed internally through the chainstay and exits at the end of the chainstay above the axle or past the axle out the very end, you will need to utilize the inline ferrule

$78.00 - $80.00
Whisky's No.7 12F is their most versatile drop bar. It's equally at home on tarmac, gravel or twisty cyclocross courses. From touring to racing, this modern bar is a great addition to almost any bike in your stable. The comfortable 12-degree flare provides excellent control and comfort, especially off-road, or in challenging conditions. A semi-compact design offers seamless transitions between positions. Available in a complete size range, this bar is a perfect fit for any rider.
- 7050 Alloy
- 282g (42cm)
- Drop: 116mm
- Reach: 68mm
- Flare: 12°
- Measured Center-to-Center at the levers

$42.00 - $50.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.

$78.00 - $80.00
The No.7 6F is our take on a modern performance drop bar. Sleek, ergonomically designed curves end in a wrist-friendly 6-degree flare at the drops. This gives just enough space to open your chest and provides forearm clearance in the drop position. This modern design offers seamless transitions between positions. The 6F features a slightly deeper drop than our 12F and 24F handlebars. Available in a complete size range so you can dial in your fit.

$565.00
Sleek and serviceable, the Whisky No.9 CXLR Fork is a tough, lightweight upgrade for gravel riders and bikepackers looking to carry a little cargo up front. Sporting 3-pack mounts, mid-blade mounts for low-rider rack compatibility, and fender eyelets on the outside of the fork legs for easy mounting, the CXLR keeps everything clean and tidy with internal routing for brakes and dynamo hubs. Additional features like flat-mount brakes, 12mm thru-axles, and ample tire clearance make this standout piece perfect for your packing setup.
- 12mm thru-axle, 100mm spacing
- 700c x 42mm or 650b x 50mm max recommended tire size
- ASTM Condition 3 – For rough off-road riding and jumps less than 24
- Includes thru-axle and Whisky Parts Co. compression plug
- Brake Mount: Flat Mount 140
- Material: Carbon
- Weight: 526g
- Steerer Type: Tapered
- Offset/Rake: 45
- Steerer Tube Length: 350mm
- Axle to Crown Length: 395mm
- S.H.I.S. Crown Race Diameter: 40
- S.H.I.S. Stem Clamp Diameter: 28.6
- Fork Minimum Rotor Size: 140
- Fork Maximum Rotor Size: 160

$48.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$33.00
Wheels Manufacturing Dropout Savers are designed to replace damaged threads in rear derailleur mounts. Made from aircraft quality steel, dropout savers provide an economical and reliable alternative to the "major surgery" of replacing a complete dropout.
- Wide Dropout Saver (DS-1) fits dropouts thicker than 7mm
- Narrow Dropout Saver (DS-2) fits dropouts 7mm or less in thickness
- 2 pieces per bag

$40.00
The Rocket is an incredibly versatile saddle. From a two minute hair-raising downhill to a 2700-mile individual time trial, this saddle is the top choice for those pushing the sport.
- Narrow nose and midsection means no chafing during long pedaling sessions
- Thick padding and a swooped tail allow riders to lock in their ideal position for power and comfort
- Steel rails

$50.00
The Silverado is one of WTB’s most iconic and revered saddle shapes. Lightweight and slim, the design oozes speed while proving to be incredibly comfortable. Ride a Silverado and you’ll quickly know what everyone’s raving about.
- Long, tapered nose and flatter platform provide ample real estate for shifting positions
- Optimized padding-to-weight ratio make the Silverado a hit across all disciplines, including road
- Steel rails

$50.00
Striking the balance between light weight, long life and durability, TruVativ's Giga Pipe Team SL Bottom Bracket uses 3 sealed cartridge bearings to provide smooth pedaling season after season. For serious strength, the Giga Pipe boasts CNC-machined aluminum cups and a stiff chromoly spindle, too.

$25.00
TruVativ Power Spline Bottom Bracket fits proprietary powerspline design popular as OE spec with many moderate-price TruVativ cranks.
• Proprietary spline design popular as OE spec with many moderate-price TruVativ cranks
• Crank bolts are included

$26.00 - $84.00
Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains.
- 104mm BCD
- Material: Aluminum

$25.00 - $26.00
- Trushift chainrings feature shift ramps and pins
- Drivetrain compatibility: 8, 9, 10, 11
- 104mm BCD

$25.00
- The ATAC EASY 10° cleat works with all TIME mountain pedals.
- Included with mountain pedal models numbered "2" and "4."
- Release angle of 10 degrees and is compatible with all two-hole cycling shoes.
- Don't let the "Easy" name fool you. If you are a high-performance rider looking to reduce the release angle from our 17 or 13 degrees, this is the choice for you.

$25.00
Replacement cleats for RXS pedals, featuring "Cafe" profiling, which means that when you walk into your local coffee shop for a mid-ride refreshment, you don't risk slipping and falling on the tile floor.

$10.00
Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

$12.99 - $20.00
- Replacement hoods for your Hylex levers.
- Color: Black or Gum
- Comes in a set of left and right

$45.99 - $54.99
TRP's new one-piece six-bolt disc rotor in 2.3mm thickness, coming in all sizes of 223 mm, 220 mm, 203 mm, and 180 mm. **For DH-R, DH-R EVO, Trail EVO and E-MTB Only** .

$105.00
Finally: a mechanical disc brake for mountain bikes and fat bikes that offers superior performance and is a snap to set up. The Spyke is a dual-sided mechanical caliper where both pads actuate to provide even and precise clamping force. This results in even pad wear and easy pad adjustment with the addition of a barrel adjuster. No longer is adjusting the whole caliper necessary as the pads wear. All of this in a 169g (per caliper) package that works with all linear-pull levers. Caliper and mounting bolts included.
SPECIFICATIONS
- Dual-piston actuation
- Even pad wear
- Easy adjustment and set up
- Works with ALL long-pull levers
- TRP's own, ultra-grippy, semi-metallic pad that is Shimano M525/M515 compatible, allowing for further customization
- Compound works well in dry conditions but may wear quickly in wet/muddy conditions
- Rotor and adapters sold separately
- Weight: 170g/caliper per wheel
Page 1 of 260
Next page